RF Connectors New Products and Services

Comp Pro® Compression Connectors for Braided Cables

CompPro

The Comp Pro® Product Line utilizes a patented compression technology that offers revolutionary advantages for a water-tight connection, easier installation, and improved system reliability on braided cables.

  • Patented 360 degree compression that seals out moisture, dust and air, preventing water ingress, eliminating connector–related downtime and maintenance over the site’s entire life cycle
  • 2X pin strength for superior RF signal transmission
  • Highest pull strength in the industry – for reliable performance in the most strenuous conditions
  • Solid, one-pice construction for an easy, one-minute installation proces

For more information please contact RF Connectors a division of RF Industries 800-233-1728, 858-549-6340

More Information rfconnectors@rfindustries.com www.rfcoaxconnectors.com

Low PIM Products for DAS from RF Industries Now Available on iBwave Design

ibwave

iBwave, the software standard for in-building wireless network design, now lists over 100 of RF Industries’ low PIM products for Distributed Antenna Systems (DAS). The products include low PIM, plenum rated cables assemblies, splitters, couplers, loads and coaxial adapters, 7-16 DIN, 4.1-9.5 (Mini) DIN and QMA.

For more information please contact RF Connectors a division of RF Industries 800-233-1728, 858-549-6340

rfconnectors@rfindustries.com www.rfcoaxconnectors.com ibwave

4.1-9.5 (Mini) DIN Adapter Kits, Low PIM Adapters for Wireless DAS

QMA Connector

4.1-9.5 (Mini) DIN to N and 7-16 DIN adapters organized and protected.

4.1-9.5 DIN connectors, commonly referred to as Mini DINs, are used in wireless infrastructure and DAS installations for their compact size and low PIM performance. Technicians encounter challenges to interface the Mini DINs with the more widely used N and 7-16 DIN connector interfaces. RF Industries manufactures a complete line of 4.1-9.5 (Mini) DIN to N and 7-16 DIN adapters and provides the most popular versions packaged in kit form, keeping these precision adapters organized and protected.

Kits are available with the popular adapters in 6 and 7 piece variations. The right angle adapter features a radius internal design that provides constant 50 ohm impedance for optimum electrical performance to 7.5 GHz. Adapters with male interfaces have large hex coupling nuts for easy mating using a torque wrench. All adapters are manufactured with brass bodies and durable non-tarnish tri-metal (white bronze) plating with a PIM rating of less than or equal to -160dBc using 2 tones at 20 watts.

All adapters in the kit and additional variations are sold separately.

  • 6 piece 4.1-9.5 (Mini) DIN to N Adapter Kit RFA-4195-01
  • 6 piece 4.1-9.5 (Mini) DIN to 7-16 DIN Adapter Kit RFA-4195-02
  • 7 piece 4.1-9.5 (Mini) DIN to N Adapter Kit RFA-4195-03
  • 7 piece 4.1-9.5 (Mini) DIN to 7-16 DIN Adapter Kit RFA-4195-04

For more information please contact RF Connectors a division of RF Industries 800-233-1728, 858-549-6340

rfconnectors@rfindustries.com Brochure More Info download PDF www.rfcoaxconnectors.com

QMA Cable Assembly with Verifiable Low PIM Performance for DAS Applications

QMA Assemblies

LTE networks are more acute in decreased system performance due to interference caused by Passive Intermodulation (PIM) in Distributed Antenna Systems (DAS). Traditional cable assemblies with QMA connectors may be a source of PIM. QMA connectors feature a snap lock connection as an alternative to threaded SMA connectors. QMA, with excellent electrical performance up to 6 GHz, is used in wireless infrastructure applications including DAS.

RF Industries manufactures cable assemblies using Times Microwave TFT-402-LF plenum rated, low loss, low PIM flexible cable terminated with QMA male straight or right angle connectors. The cable meets UL910 fire requirements for in-building applications. The PIM values are less than -140dBc using 2 tones at 20 watts.

All low PIM cable assemblies manufactured by RF Industries are tested to certify they meet or exceed the advertised specifications. The PIM value is printed on the cable assembly along with a serial number. For verification, a complete PIM performance chart is available for download by entering the cable serial number in PIM Tracker™ on the RF Industries web site.

Assemblies are available in standard 1 and 2 meter lengths as well as custom lengths. In addition to QMA connectors, the assemblies can be terminated with SMA, N, 7-16 DIN and 4.1-9.5 (Mini) DIN connectors.

For more information please contact RF Cable Assembly a division of RF Industries 800-233-1728, 858-549-6340

rfcables@rfindustries.com download PDF www.rfcables.com Brochure

Low PIM .141 Conformable Cable Assemblies, Alternative to Semi-Rigid for Distributed Antenna System (DAS) Installations

Cable Assembly

Standard semi-rigid .141 cable assemblies with a solid jacket metal shield offer excellent electrical and low PIM performance. For installations with cable bends, special equipment is required to form the cable, requiring advance planning and longer lead times.

RF Industries conformable semi-rigid cable assemblies are manufactured with tin filled, braided outer conductor that exhibits similar electrical properties to solid semi-rigid, but can be hand formed in the field with no degradation in electrical or PIM performance. The cable has a diameter of .141 inches with a protective insulated blue jacket. The assemblies are available terminated with N male and/or QMA male connectors. Assemblies are available in standard lengths of 3, 6 and 9 feet or custom lengths. They have a VSWR of under 1.2:1 up to 2,400 MHz with an operating frequency up to 3,000 MHz. The PIM rating is less than -155 dBc for the N male connectors and -140 dBc for the QMA male connectors using 2 tones at 20 watts.

All low PIM cable assemblies manufactured by RF Industries are tested to certify they meet or exceed the advertised specifications. The PIM value is printed on the cable assembly along with a serial number. For verification, a complete PIM performance chart is available by entering the cable serial number in PIM Tracker™ on the RF Industries website.

For plenum rated requirements, RF Industries manufactures assemblies using Times Microwave TFT-402-LF cable.

For more information please contact RF Cable Assembly a division of RF Industries 800-233-1728, 858-549-6340

rfcables@rfindustries.com download PDF www.rfcables.com

RF Industries introduces a low PIM adapter for quick mate QMA to connect with an N type interface

QMA Connector

QMA connectors feature a snap lock connection as an alternative to the SMA connector with a threaded connection. The QMA connector, with a quick connect disconnect feature along with excellent electrical performance up to 6 GHz, is used in wireless infrastructure applications including DAS (Distributed Antenna Systems).

The RQA-5478 between series adapter features a QMA female to N male interface that will allow connection of a QMA male terminated cable assemble to equipment with an N female connector. The adapter is manufactured with a machined brass body, plated in a durable tri-metal (white-bronze) finish. The contact is tri-metal (white-bronze). The adapter is rated for low PIM performance of ≤-155 dBc using 2 tones at 20 watts.

For more information please contact RF Connectors a division of RF Industries 800-233-1728, 858-549-6340

rfconnectors@rfindustries.com download PDF

RF Industries adds Female Barrel Adapter to Extensive line of 4.1/9.5 (Mini) DIN Adapters

SMB Panel Mount

The 4.1/9.5 (Mini) DIN connector interface has been used in wireless infrastructure and DAS (Distributed Antenna Systems) applications. Essentially a compact version of the 7/16 DIN connector interface, the 4.1/9.5 (Mini) DIN offers good electrical performance and low PIM (Passive Intermodulation).

RF Industries introduces the 4.1/9.5 (Mini) DIN female-to-female barrel adapter, part number RFD-4195-1953. The adapter is manufactured with machine brass body, plated in a durable tri-metal (white-bronze) finish with a PIM rating of less than or equal to -160 dBc using 2 tones at 20 watts.

In addition to the female-to-female adapter, RF Industries offers ten 4.1/9.5 (Mini) DIN in-series and between-series adapters to N and 7/16 DIN interfaces.

For more information please contact RF Connectors a division of RF Industries 800-233-1728, 858-549-6340

rfconnectors@rfindustries.com download PDF

QMA high performance, low loss cable assemblies support wireless DAS applications

QMA Assembly

QMA connectors feature a snap lock connection as an alternative to SMA connectors with a threaded connection. The QMA connector, with a quick connect/disconnect feature along with excellent electrical performance up to 6 Ghz, is used in wireless infrastructure applications including DAS (Distributed Antenna Systems).

RF Industries manufactures QMA coax cable assemblies with Time Microwave LMR®-240 and LMR-195 low loss, high performance cables and RG-142 double shielded cable. Plenum rated RG-142 is also available. Cables are terminated with QMA straight and right angle connectors as well as other connectors, including N, SMA, TNC, BNC and 7/16 DIN. Assemblies are custom made to customer required lengths. All assemblies are electrical tested to assure performance.

For more information please contact RF Connectors a division of RF Industries 800-233-1728, 858-549-6340

rfconnectors@rfindustries.com download PDF

RF Industries Expands offering of Low PIM 4.1/9.5 (Mini) DIN Adapters with 2 New Variations

Inseries Mini Adapter

In addition to 8 variations of 4.1/9.5 (Mini) DIN to N type and 7/16 DIN adapters, RF Industries developed a 4.1/9.5 (Mini) DIN male to female right angle and straight adapters. The 4.1/9.5 (Mini) DIN is essentially a compact version of the 7-16 DIN with similar electrical performance. Applications include wireless infrastructure sites, indoor/outdoor DAS (Distributed Antenna Systems) requiring low PIM (Passive Intermodulation) performance.

The right angle adapter features a radius internal design that provides constant 50 ohm impedance for optimum electrical performance to 7.5 GHz. Both adapters have large hex nuts on the male interface for easy mating with a torque wrench. All adapters are manufactured with brass bodies in durable non-tarnish tri-metal (white bronze) plating with a PIM rating of less than or equal to -160dBc using 2 tones at 20 watts.

  • 4.1/9.5 DIN male to female straight, part number RFD-4195-1950
  • 4.1/9.5 DIN male to female right angle, part number RFD-4195-1952

For more information please contact RF Connectors a division of RF Industries 800-233-1728, 858-549-6340

rfconnectors@rfindustries.com Brochure download PDF

RF Industries manufactures Plenum Rated, Low PIM Cable Assemblies for In-Building DAS applications with 4.1/9.5 (Mini) DIN Connectors

Plenum Cable Mini Adapter

The 4.1/9.5 (Mini) DIN connector interface is essentially a compact version of the 7/16 DIN with applications on DAS (Distributed Antenna Systems) and wireless infrastructure. RF Industries manufactures 4.1/9.5 (Mini) DIN male connectors and terminates them onto Times Microwave plenum rated low PIM cables SPP-250-LLPL™ and TFT-402-LF. The SPP-250-LLPL™ is a ¼ inch super-flexible corrugated cable. The TFT-402-LF is an extremely flexible, flat braided, low minimum bend radius cable similar to semi-rigid .141 cable. Both cables meet UL910 fire requirements and exhibit low loss and low PIM (Passive Intermodulation) performance. The finished assemblies PIM performance meets or exceeds minus 160 dBc.

Cable assemblies are available in standard 1 and 2 meter lengths as well as custom lengths. RF Industries attaches the connectors via soldering the center pin and induction soldering to the cable outer conductor, providing excellent VSWR performance and reliable PIM performance. All finished cable assemblies are 100% final tested for electrical and PIM performance to assure every cable assembly meets the advertised specifications.

For more information please contact RF Connectors a division of RF Industries 800-233-1728, 858-549-6340

Brochure download PDF rfconnectors@rfindustries.com

Splitters, Couplers and Loads Reduce PIM for DAS Applications

Splitters, Couplers and Loads

For optimal performance of Distributed Antenna Systems (DAS) reliable low PIM components are required. RF Industries manufactures a line of low PIM power splitters, hybrid couplers and terminations/loads. Splitters and couplers have a PIM3 rating of less than or equal to -155dBc with an operating frequency range of 698-2700 MHz. The power splitters are available in 2 way, 3 way or 4 way configurations and, along with the 3dB hybrid coupler, feature N female connectors. Termination/loads have a PIM3 rating of less than or equal to -110 dBc and are available in 30 watt or 50 watt configurations with N male connectors.

For more information please contact RF Connectors a division of RF Industries 800-233-1728, 858-549-6340

rfconnectors@rfindustries.com more information Brochure download PDF www.rfcoaxconnectors.com

Low PIM 4.1-9.5 (Mini) DIN Adapters, 10 Variations Available by RF Industries

4.1-9.5 (Mini) DIN Adapters

Advanced wireless systems such as DAS (Distributed Antenna Systems) require RF components that, in addition to being highly efficient in signal transfer, must have low PIM (Passive Intermodulation) properties. The N type interface design is over 70 year old and has been replaced in many wireless site applications with the larger 7-16 DIN interface for better electrical and PIM performance. The 4.1-9.5 (Mini) DIN is essentially a compact version of the 7-16 DIN with similar electrical performance.

RF Industries provides within series 4.1-9.5 adapters and between series adapters for the 4.1-9.5 (Mini) DIN, 7-16 DIN and N type interfaces. All adapters are manufactured with brass bodies in durable non-tarnish tri-metal (white bronze) plating with a PIM rating of less than or equal to -160dBc.

  • 4.1-9.5 DIN male to N female, part number RFN-1046-4
  • 4.1-9.5 DIN male to N male, part number RFN-1045-4
  • 4.1-9.5 DIN female to N female, part number RFN-1047-4
  • 4.1-9.5 DIN female to N male, part number RFN-1048-4
  • 4.1-9.5 DIN male to 7-16 DIN female, part number RFD-1681-4
  • 4.1-9.5 DIN male to 7-16 DIN male, part number RFD-1682-4
  • 4.1-9.5 DIN female to 7-16 DIN female, part number RFD-1683-4
  • 4.1-9.5 DIN female to 7-16 DIN male, part number RFD-1684-4
  • 4.1-9.5 DIN male to 4.1-9.5 female, part number RFD-4195-1950
  • 4.1-9.5 DIN female to 4.1-9.5 male, right angle part number RFD-4195-1952

For more information please contact RF Connectors a division of RF Industries 800-233-1728, 858-549-6340

rfconnectors@rfindustries.com more information Spec Sheet download PDF www.rfcoaxconnectors.com

Plenum Rated, Low Loss, Low PIM, Flexible Coaxial Cable Assemblies for In-Building DAS Applications.

Plenum Cables

Distributed Antenna Systems (DAS) installations in buildings use large numbers of coaxial cable assemblies with special requirements. The assemblies need to efficiently transfer the RF signal (low loss), reduce the occurrence of interference caused by intermodulation (low PIM), fit into tight mechanical spaces (flexible) and meet building fire codes (plenum rated). Most coaxial cable assemblies meet some of these requirements, but fall short of meeting them all.

RF Industries offers coaxial cable assemblies with Times Microwave SPP-250-LLPL™ and TFT-402-LF plenum rated, low loss, low PIM, flexible cables that meet all these requirements for an in-building DAS coaxial assembly. The SPP-250-LLPL™ is a small diameter corrugated cable. The TFT-402-LF is an extremely flexible, low minimum bend radius cable. Both cables meet UL910 fire requirements and exhibit low loss and low PIM performance.

Cable assemblies are available in standard and custom lengths terminated with RF Industries brand or Times Microwave brand RF connectors. Connector terminations include 7-16 DIN male, 4.1-9.5 (Mini) DIN male, N male and SMA male. RF Industries applies high standards of manufacturing techniques and tooling with 100% final testing for electrical and PIM performance to assure every cable assembly meets the advertised specifications.

For more information please contact RF Connectors a division of RF Industries 800-233-1728, 858-549-6340

rfconnectors@rfindustries.com more information download PDF www.rfcoaxconnectors.com

RF Industries responds to huge Wireless Industry demand for DC power cables

Power Cables

Wireless infrastructure installations require DC power for up the tower and in the building applications. RF Industries provides outdoor and indoor multi-conductor composite power cables in standard and custom configurations/

Outdoor DC Power cables run power up the tower to support Fiber-to-the-Antenna (FTTA) applications. RF Industries manufactures standard configurations that include 2 conductor 8 gauge, 2 conductor 10 gauge, 2 conductor 12 gauge and 6 conductor 8 gauge insulated tinned copper wires rated for 600 volts. All cables include tinned copper braid and aluminum tape shield with a drain wire. The cables are UL Type TC (Tray Cable) approved with PVC jacket that are sunlight resistant and are approved for direct burial applications.

Indoor DC Power cable, TelcoFlex® III by Southwire, is the industry standard when it comes to indoor DC power cabling. Cable is available from 2/0 to 10 AWG wire size with gray cloth jacket to meet most indoor wireless (iDAS) applications. Black, blue, green and red jacket colors are also available.

Cables may be purchased by the foot or in bulk reels in standard or custom configurations.

For more information please contact RF Cable Assembly, a division of RF Industries at 800-233-1728, 858-549-6340
rfcables@rfindustries.com www.rfcables.com

Outdoor DC Power Cable Spec Sheet Outdoor DC Power Cable Brochure Indoor DC Power Cable Brochure download PDF

New N Connectors Simplify Installation on High Performance Coax Cables

N Connectors

Proper installation of RF connectors onto coax cable is critical in wireless system performance. Two new N male connectors simplify the installation process by eliminating the need to trim the braid during cable preparation. The RFN-1006-49I features a solderless captive pin and the RFN-1006-4I features a crimp pin. Both connectors are compatible for high performance cables such as Times Microwave LMR®-400, CommScope CNT®-400, Belden 9913, and RF Industries CBL-CU400®. Combination hex/knurl coupling nuts allow for tightening by hand or wrench. White Bronze (tri-metal) plating eliminates tarnishing while providing improved electrical performance and reduced PIM (Passive Intermodulation). Exceptional VSWR of less than 1.10 to 1 up to 3Ghz and less than 1.20 to 1 up to 8Ghz is achieved through an enhanced impedance matching design. Industry standard tooling can be used for cable preparation and crimp termination. Heat shrink and assembly instructions are included with each connector. VSWR charts are available: RFN-1006-4I and RFN-1006-49I.

For more information please contact RF Connectors a division of RF Industries 800-233-1728, 858-549-6340
rfconnectors@rfindustries.com more information download PDF www.rfcoaxconnectors.com

Installing Remote Radio Heads? With OptiFlex™ hybrid cable solutions, you simply climb, attach and connect—you’re done!

OptiFlex

Cables Unlimited, a division of RF Industries has flexible solutions for you.

Custom, application specific OptiFlex™ hybrid cabling solutions are perfect for wireless carriers updating their networks to 4G technologies, WiMAX, LTE, etc. because they deliver optimal low loss performance with less cost than standard tower configurations. Time and money is saved is several ways. Fewer tower runs, deployment lengths up to 550 feet with <10% voltage drop (based on radio power up to 950 watts), reduced or eliminated tower hardware, eliminated grounding cables, shipping and deployment cost savings because of lower weight and more efficient site installations. Cables arrive pre-terminated with appropriate breakouts weatherized and ready to plug and play with standard tools and basic fiber and power testers.

All OptiFlex™ hybrid cables are produced to your specifications combining coax, multiple fiber, Ethernet and power cables bundles within a rugged UV, heat and moisture resistant PVC outer jacket that can withstand harsh weather conditions or direct burial. These custom cables are weatherized from end to breakouts insuring optimal performance in environments up to 75 degrees centigrade wet or dry. All assemblies are US manufactured—pre-terminated by Corning Gold certified technicians in our New York production facility using Corning fiber components and domestic cables, fillers, shielding and jackets.

Cables Unlimited is a division of RF Industries (NASDAQ RFIL) a long-standing supplier of cables and wire harnesses.

For more information please contact Cables Unlimited a division of RF Industries at 800-590-9965, 631-563-6363
quotes@cables-unlimited.com spec Sheet more information download PDF www.cables-unlimited.com

Connector Saver with Stainless Steel Coupling Nut Reduces Testing Expense

P2RFD-1660-SS Connector Saver

7-16 DIN CONNECTORS are large format 50 ohm interfaces designed for high power wireless telecommunications applications such as antennas, base stations, and satellite communications.

Test ports are subject to minimal wear each time the connector interface is coupled and de-coupled. Contact pins and dielectrics can be damaged if connectors are misaligned during coupling. It is far more cost effective to introduce a "connector saver" adapter as the adapter mated directly to the test port adapter. One mating cycle on the test port to five hundred or more on the connector saver increases the testing life of the test port. Any misaligned matings will damage the connector saver, not the test port interface.

The P2RFD-1660-SS low loss, low VSWR, precision adapter performs this function when testing 7-16 DIN connectors and assemblies. After carefully installing the P2RFA-1660-SS on the test port, hundreds of tests, even PIM testing (requiring greater torque per test to insure proper ground) can be performed before wear requires replacement. The P2RFD-1660-SS adapter is machined to exacting specifications with a white bronze plated body and stainless steel coupling nut for tarnish free service.

RFP2™ Precision Products from RF Connectors division of RF Industries 800-233-1728, 858-549-6340
rfconnectors@rfindustries.com more information download PDF www.rfcoaxconnectors.com

Fiber Optic Cables—High Density MTP

Fiber Optic Cable

Cables Unlimited offers Corning fiber assemblies using Multi-fiber Termination Push-on (referred to as MTP) connectors designed by USConec. This compact design allows high-density connections between network equipment. A simple push-pull latching mechanism provides easy insertion and removal. Where space is an issue, the MTP allows for more connectors on the overcrowded faceplate, thus reducing the footprint of the systems. It will interface with current MPO connectors. Though about twice the size as an SC connector it can hold up to 12 fibers, thereby providing up to 12 times the density.

Cables Unlimited is a division of RF Industries (NASDAQ RFIL) a long-standing supplier of cables and wire harnesses.

For more information please contact Cables Unlimited a division of RF Industries at 800-590-9965, 631-563-6363
quotes@cables-unlimited.com more information download PDF www.cables-unlimited.com

Precision 7-16 DIN Adapters Holds up to Repeated Mating Cycles

img-np-RFA-4013-WB

P2RFA-4013-SS   named one of the Top 101 Components for 2012 by Electronic Design

7-16 DIN adapters are highly desired in test applications such as base station passive intermodulation (PIM) testing. These low loss, low VSWR adapters are designed to be used with portable antenna and cable analyzers. Anritsu’s Site Master™, Summitek’s SI™ series and Boonton’s PIM testers are examples where high grade DIN adapters are used. The P2RFA-4013-SS, 7-16 DIN Precision Adapter Kit, gives you six of the most needed 7-16 DIN and N adapters for bench and field use.

All 7-16 DIN adapters are machined to exacting specifications with White Bronze plated bodies and Stainless Steel coupling nuts for tarnish free service and superior electrical performance along with low PIM. White Bronze plating offers a non-magnetic solution while retaining high conductivity in the conductor paths. Engineered for long life in field applications, they are also suitable for lab environments.

For more information please contact RF Connectors a division of RF Industries 800-233-1728, 858-549-6340
rfconnectors@rfindustries.com more information download PDF www.rfcoaxconnectors.com

Precision 26.5 GHz Phase Stable Cables Offer Accurate RF and Microwave Measurements

Precision 26.5 GHz

Test grade cables are a must for RF applications. The test cables serve as the extension of the equipment’ test ports. They provide flexibility for measuring cable assemblies or other microwave devices. It is vital to system performance that they remain stable when subjected to environmental or mechanical stresses. Phase stable cables have triple shielding with low loss dielectric and high temp jacketing to minimize the phase effects when flexed multiple times. The connectors are made of rugged stainless steel for extended attachment and feature a strain relief support designed for armoring as an option. RF Precision Products now offers such cables for applications up to 26.5 GHz. Test charts included. Off the shelf lengths are as follows. Custom lengths are available.

RF Precision Products designs and manufactures precision grade, high frequency stainless steel connectors and adapters for OEM, military and metrology labs.

RFP2™ Precision Products from RF Connectors division of RF Industries 800-233-1728, 858-549-6340
rfconnectors@rfindustries.com more information download PDF www.rfcoaxconnectors.com

N Female Connector Designed for Popular Plenum Cable

RFN-1028-SI

Where wireless applications require an easily routed, low loss RF cable for in-building systems, Times Microwave’s LMR®-400-LLPL has become a popular choice. This cable is an indoor highly fire retarded cable intended specifically for runs within return air handling plenums (e.g. dropped ceilings, raised floors).

To meet the connection needs of this plenum cable RF Connectors has designed the RFN-1028-I2 N female connector with crimp attachment to offer the perfect fit and performance. The connector body is made of machined brass with nickel plating. All dielectrics are made of PTFE with gold plated contacts.

RF Connectors is a division of RF Industries (NASDAQ RFIL) a leading supplier of connecting solutions provided through its operating divisions: RF Connectors, RF Cable Assembly.

For more information please contact RF Connectors a division of RF Industries 800-233-1728, 858-549-6340
rfconnectors@rfindustries.com more information download PDF www.rfcoaxconnectors.com

Universal Adapter Kit Now Available in White Bronze Plating

RFA-4024-WB

RF Connectors’ 30-piece classic Unidapt™ kit has been a favorite of bench and line technicians for years. We now offer this kit with white bronze plating, RFA-4024-WB. White bronze provides a tarnish free. non-magnetic solution with electrical performance rivaling silver plated products. In addition, white bronze is corrosion resistant, lead-free, and has low intermodulation distortion. Unidapt™ system adapters come with gold-plated contacts and PTFE insulation.

Simply mix or match any male to male, female to female, or male to female adapter components. Literally hundreds of different adapters can be made instantly using the N, BNC, TNC, SMA, UHF or M-UHF components contained within our classic RFA-4024 Unidapt™ kit. The universal center adapter is the key.

For more information please contact RF Connectors a division of RF Industries 800-233-1728, 858-549-6340
rfconnectors@rfindustries.com more information download PDF www.rfcoaxconnectors.com

Test Grade 7-16 Adapters have Stainless Steel Coupling Nuts for harsh test environments

Precision 7-16 DIN Adapters

7-16 DIN to N adapters are highly desired in applications such as base station Passive Intermodulation (PIM) testing. Portable Time Domain Reflectometry (TDR) analyzers require rugged adapters that withstand varying field environments while maintaining error correction ratios. White Bronze plating offers a tarnish free non-magnetic solution with electrical performance rivaling Silver plated products. Stainless steel coupling nuts allow repetitive torque settings of 18 ft-lbs minimum for DIN males and 30 in-lbs maximum for N males. These adapters have extremely low insertion loss, excellent VSWR and low PIM performance which makes them the adapter of choice for PIM and TDR analyzers. All adapters in the series are tested in-house to 8 GHz and up to 13 GHz on selected models. Test charts included with each adapter.

Test charts included. Parts available are:

  • P2RFD-1670-SS: 7-16 DIN Male to N Male; White Bronze, Stainless Steel Coupling Nut
  • P2RFD-1671-SS: 7-16 DIN Male to N Female; White Bronze, Stainless Steel Coupling Nut
  • P2RFD-1672-SS: 7-16 DIN Female to N Male; White Bronze, Stainless Steel Coupling Nut

RF Precision Products designs and manufactures precision grade, high frequency stainless steel connectors and adapters for OEM, military and metrology labs. RF Precision Products is a division of RF Industries (NASDAQ: RFIL), a leading supplier of connecting solutions provided through its operation divisions.

RFP2™ Precision Products from RF Connectors division of RF Industries 800-233-1728, 858-549-6340
rfconnectors@rfindustries.com more information download PDF www.rfcoaxconnectors.com

Precision Adapters Designed for Low Insertion Loss/VSWR up to 18GHz

Precision Adapters

Test grade adapters need to be rugged and versatile for use in lab or field applications. To meet this increasing need, RF Precision Products has released a complete line of the most popular test adapters covering SMA and N-types. Precision machined passivated stainless steel construction for long life, repeated use and corrosion resistance. All adapters feature epoxy captivated components and are designed for outstanding electrical performance with low loss and guaranteed low VSWR to 18 GHz. N to SMA adapters are suitable for use with the Anritsu Site Master™ line of test equipment and other similar popular brands.

RF Precision Products designs and manufactures precision grade, high frequency stainless steel connectors and adapters for OEM, military and metrology labs. RF Precision Products is a division of RF Industries (NASDAQ: RFIL), a leading supplier of connecting solutions provided through its divisions.

RFP2™ Precision Products from RF Connectors division of RF Industries 800-233-1728, 858-549-6340
rfconnectors@rfindustries.com more information download PDF www.rfcoaxconnectors.com

Ultimate universal adapter system supports field and bench techs

RFA-4022

The Unidapt™ coaxial adapter system has been a favorite of field and bench technicians for many years. The key element of this system is the small, universal adapter that is used to join any two Unidapt™ adapters with standard coaxial interfaces to create literally hundreds of different adapters on the fly. The seventy-four-piece RFA-4022 Unidapt™ Mega-Plus Kit contains everything needed to troubleshoot and test 7-16 DIN, BNC, F, Mini-UHF, MCX, MMCX, N, RCA, Reverse Polarity SMA and TNC, SMA, SMB, TNC and UHF terminated devices. In addition to fifty-five standard straight adapters, this kit contains a universal tee, a universal right angle adapter, RF sampler and injector for use up to 3 GHz, binding post adapter, banana plug adapter, two 48" Unicables™, barrel adapter for joining Unicables™ and the Unidapt™ coaxial cable tester. All coaxial components feature silver-plated brass bodies, gold-plated contacts and PTFE insulation. The Unicables™ feature universal adapter terminations and double-shielded RG-58A/U cable.

For more information please contact RF Connectors a division of RF Industries 800-233-1728, 858-549-6340
rfconnectors@rfindustries.com more information Download PDF www.rfcoaxconnectors.com

High Frequency Test Cables Now Available in New Product Line

18Ghz Test Cables

Test grade cables are desired in applications where multiple connector attachment and continuous flexing demands are a priority. RF Industries now offers a line of 18GHz precision test cables in standard or custom lengths, suitable for production or lab environments. Featuring high-grade, passivated, stainless steel SMA males with PTFE insulators, this unique cable is configured for low loss and low VSWR. With triple shielding for optimum EMI protection, they are very phase-stable during mechanical and environmental stresses. The cable is also manufactured in accordance with MIL-DTL-17, type IX specification. Other features include high velocity of propagation, wide operating temperature and blue FEP jacket. Armored versions for rugged field applications are also available. RF Industries created these test cables to meet a growing need for test grade cable assemblies.

Electrical data is: 50 Ohms impedance, 23.8 pf/ft capacitance, 85% Vp, better than -95 dB shielding effectiveness, -55 to +200C operating temperature and -.50 @ 18GHz dB/ft attenuation.

RFP2™ Precision Products from RF Connectors division of RF Industries 800-233-1728, 858-549-6340
rfconnectors@rfindustries.com more information download PDF www.rfcoaxconnectors.com

Conduit-Ready cable makes home wiring easy

conduit-ready VGA

In the home entertainment market we see a large demand for conduit-ready VGA (video graphics array) or RGB cables. These cables are used to connect computers, projectors, monitors and flatscreens. In the past, most people who used these cables were audio-video contractors and installers who used them in sports bars and presentation halls. Many adventurous homeowners are now purchasing them for their home theaters, with the simplicity of doing it themselves with conduit-ready cable.

Conduit is run through walls, ceilings and floors, usually with several sweeping bends. This is typically done during the construction or remodeling phase of a building. The conduit is metal or PVC tubing, large enough to accommodate a VGA connector. This large diameter conduit can be very expensive.

Our conduit-ready VGA cable reduces costs by using smaller diameter conduit and attaching the VGA connector afterward. When all the construction has been completed, our conduit-ready VGA cable is hooked onto a pull-line and drawn through the smaller conduit. Connectors are then attached with a few pins and screws and you’re done! The small additional cost of our conduit ready VGA cable is more than compensated by the savings of using smaller conduit.

For more information please contact RF Cable Assembly a division of RF Industries 800-233-1728, 858-549-6340

rfcables@rfindustries.com www.rfcables.com

Semi-Rigid Coax Cable Assemblies for Critical Applications

Semi Rigid-Cables

For critical applications of higher frequency, improved performance and or more stable operation, semi rigid cable assemblies are used. RF Cable Assembly division produces a variety of semi-rigid assemblies. Assemblies using .047, .085, .141 and .250 diameter cable can be manufactured to customer length requirements. Solid and conformable cable can be specified. Available connectors include 2.9mm, 7-16 DIN, N type, and SMA. Interfaces include male for all cables with female and bulkhead female available for selected cables. All cables are tested for electrical continuity with additional testing services available.

For additional information call us at 858-549-6340 or 800-233-1728. You can also e-mail us at rfi@rfindustries.com
or visit our website www.rfcables.com Download PDF

Kit combines precision 3.5mm adapters for high frequency applications

P2RFA-4031-01

The RFA-4031-01 kit features three 3.5mm precision adapters added to the RF Connector product line for use in microwave and RF applications. All 3.5mm adapters in this series have 50 ohm impedance and are made of non-magnetic, 303 stainless steel with beryllium copper contacts, supported with a bead configuration. They are designed to operate up to 34 GHz with a VSWR rating of 1.05+.006 f (f-GHz) max, and have the same electrical length. 3.5mm series coaxial connectors and adapters inter-mate with SMA and 2.9mm connectors and are used primarily on test equipment. Female contacts feature a four-slot configuration, ensuring that pressure is distributed evenly during the engagement of the male pin, a design which, when combined with a shortened male pin, eliminates misalignment during engagement.

Adapters in the kit include

  • P2RF35M-35M-026—male-to-male
  • P2RF35F-35F-026—female-to-female
  • P2RF35M-35F-026—male-to-female

The adapters are housed in a compact, foam-lined, zippered case for convenience and protection of the components when not in use.

RFP2™ Precision Products from RF Connectors division of RF Industries 800-233-1728, 858-549-6340
rfconnectors@rfindustries.com more Information www.rfcoaxconnectors.com

2.92 mm Connectors Added to Product Line

Precision Connector

P2RF29M-SR1 is a 50 Ohm 2.92 mm precision connector that has been designed for superior performance and excellent characteristics for applications up to 40 GHz, and useable to 46 GHz. 2.92mm connectors meet highest levels of reliability and repeatability, and conform to IEEE 287 standard. P2RF29M-SR1 is mechanically compatible with SMA and 3.5mm connectors and has a shortened male pin, ensuring a non-destructive mating process. The P2RF29M-SR1, designed for .085" semi-rigid and high performance flexible cable assemblies, has a gold plated body and pin with a molded dielectric bead and a stainless-steel coupling nut.

RFP2™ Precision Products from RF Connectors division of RF Industries 800-233-1728, 858-549-6340
rfconnectors@rfindustries.com www.rfcoaxconnectors.com

Improved Environmental Performance for Solderless N Connector

RFN-1006-I-WB was named Top 101 Components for 2009 by Electronic Design Magazine

RFM 1006-1-WB

The majority of N type connectors are installed at remote sites exposed to the environment. The RF Connectors Division of RF Industries offers an improved N male connector for high performance .400 inch diameter cables. Part number RFN-1006-I-WB features white bronze plating for a non-tarnish finish with enhanced electrical performance. The plating is ferrous metal free, which reduces inter-modulation interference. A ridged back end provides better sealing for the heat shrink boot included with the connector. A combination hex/knurl coupling nut allows for wrench or finger mating. The connector may be attached to multiple brands of high performance cables including Times LMR®-400, Andrew CNT®-400, CommScope WBC®-400 and Belden® RF-400. The connector is assembled with industry standard crimp tools with .429 inch and .118 inch hex dies. The contact design includes a "weep hole" for optional solder installation.

For additional information call us at 858-549-6340 or 800-233-1728. You can also e-mail at rfi@rfindustries.com Download PDF

Kit Simplifies Installation of N Male Connectors

RFN-4511

Correct connector installation with the proper tools is critical to wireless system performance. With that in mind, RF Connectors has introduced the RFA-4511 Series, a comprehensive installation kit series for crimping N-type connectors onto Times LMR-400® or equivalent cables. The kit combines a cable cutter, one-step cable stripper, the Cable Devil™ preparation tool, professional grade crimp tool and die, and 25 N male connectors. All are housed in a rugged, foam lined case with installation instructions.

For additional information call us at 858-549-6340 or 800-233-1728. You can also e-mail us at rfi@rfindustries.com Download PDF

RF Connectors Coax Connector Solutions Catalog

RF Connectors Catalog

The new 156-page RF Connectors Coax Connector Solutions Catalog highlights their line of coaxial connectors, adapters, tools and kits. It is available free of charge.

The guide provides product specifications, stripping guidelines and photos for over 1200 coaxial products stocked for shipping. Extensive coverage is given to classic connector lines, such as BNC, TNC, N, UHF, Mini-UHF, SMA, SMB, MCX, MMCX, 7-16 DIN, FME, and those compatible with Times LMR® cables.

LMR® is a registered trademark of Times Microwave.

The catalog also includes the newest WiFi and broadband products. Available in print, on CD and our website. Contact.

For additional information call us at 858-549-6340 or 800-233-1728. You can also e-mail us at rfi@rfindustries.com

UHF Connectors for Heliax® Cable

UHF Connectors

Availability of UHF connectors for LDF4-50A ½ inch Andrew Heliax® cable was limited to the secondary market when manufacturing ceased several years ago. RF Connectors division of RF Industries has released UHF male and UHF female connectors for LDF4-50A ½ inch cable to fill that need. These connectors utilize the same installation process and tooling required for the discontinued connectors. Manufactured with white bronze plated, machined brass bodies, these new connectors feature silver plated phosphor bronze contacts and PTFE dielectric. White bronze is resistant to tarnish, but has high conductivity and low (IM) intermodulation. The male connector, RFU-502-H1, and the female connector, RFU-520-H1 also work with Andrew LDF-4-50A cable, Andrew LDF4-RN-50A cable, RFS 810918-001 cable, RFS LCF12-50J cable and Eupen 5128 cable.

Heliax® is a registered trademarked of Andrew Corporation.

For additional information call us at 858-549-6340 or 800-233-1728. You can also e-mail rfi@rfindustries.com Download PDF

Miniature RF Coax Cable Assemblies for Hirose U.FL and I-PEX MHF Applications

Miniature RF Coax Cable Assemblies

Many wireless PC board RF modules use Hirose U.F.L or I-PEX MHF miniature connectors. Jumper cables are used to connect the PC board to the device housing or case. RF Connectors, a division of RF Industries, offers the MHF series coax cable jumper. These cables use the I-PEX brand MHF connector and 1.13 mm coax cable that is compatible with Hirose U.F.L.

Assemblies are available with a variety of connector terminations including SMA reverse polarity, TNC female or reverse polarity female bulkhead, N female bulkhead, SMA male, N male, MMCX, MC card. Most assemblies are manufactured in standard lengths of 3, 6, 8, and 12 inches. Electrical performance is good up to 6 GHz with a VSWR rating of 1.3 maximum. RF Cable Assembly fabricates coax cable assemblies.

For additional information call us at 858-549-6340 or 800-233-1728. You can also e-mail rfi@rfindustries.com Download PDF

High Performance Low Loss Custom Fabricated Cable

Low Loss Fabricated Cable

Wireless communication systems of today require high performance RF cable assemblies built to custom lengths using a variety of connectors. RF Cable Assembly, a division of RF Industries, fabricates custom assemblies with Times Microwave LMR®-400 high performance low loss cable. Assemblies are available in lead-free RoHS compliant upon request. Custom lengths from 4 inches to over 400 feet are available. Connector terminations include male or female N-type, 7/16 DIN, TNC, BNC, and SMA connectors. Materials are generally silver or tri-metal plated machined brass bodies, PTFE dielectrics, and silver or gold plated contacts.

For additional information call us at 858-549-6340 or 800-233-1728. You can also e-mail rfi@rfindustries.comDownload PDF

Solderless Right-Angle QMA Connector Reduces Installation Time

RQA-5010-8X

Traditional right-angle connectors require soldering the center conductor, which increases the difficulty of field installation and time required. RF Connectors division of RF Industries produces a solderless right-angle QMA connector, part number RQA-5010-8X. The QMA series connector is similar to the SMA internal configuration with a snap-on interface that allows for mating and un-mating without the use of tools. The connector features a sliding snap-lock mechanism that works by sliding the shell back and releasing to lock both connectors in place. After mating, QMA connectors can be rotated 360°. Designed to mate with all QMA jacks, they offer good electrical performance up to 6 GHz.

The RQA-5010-8X connector terminates .240 inch diameter high-performance, low-loss cables: Times Microwave LMR®-240, Andrew Cinta CNT-240®, CommScope WBC-240®, or Belden RF-240®. All of RF Connectors QMA series feature tri-metal plated brass bodies, PTFE insulation, spring copper alloy outer contacts and gold-plated inner contacts.

For additional information call us at 858-549-6340 or 800-233-1728. You can also e-mail rfi@rfindustries.comDownload PDF

Right Angle N-male Connector Termination for Limited Space Installations

RFN-1009-I

Termination of high performance/low loss RF cable in tight spaces can be a problem with standard connectors. RF Connectors division of RF Industries provides a compact right angle N-male connector, part number RFN-1009-I for termination onto Times Microwave LMR®-400, Andrew CNT- 400, Belden RF400, and Commscope WBC-400 cables. The connector attaches to the cable with crimp termination for the shield and solder termination for the center conductor.

For additional information call us at 858-549-6340 or 800-233-1728. You can also e-mail rfi@rfindustries.comDownload PDF

Universal Cable Test Kit for Wi-Fi and Broadband Applications

RFA-4028-WiFi kit

Wireless, Wi-Fi and Broadband infrastructure installation requires cables for RF and data throughput. Testing these cable assemblies in the field can be difficult with the variety of unique connectors available today as well as the popular reverse polarity styles. The RFA-4028-WIFI kit by RF Connectors, a division of RF Industries, simplifies the task. The kit contains a Unidapt RF Cable tester (RFA-4018-20) with an assortment of 30 universal adapters, including male and female MMCX, N, Reverse Polarity TNC, Reverse Polarity SMA, TNC, BNC and SMA connector interfaces. By joining two adapters using a universal center included in the kit, coaxial adapters can be made with any combination of these interfaces. The RFA-4018-20 coaxial cable tester is a solid-state continuity checker that measures for opens and shorts. The LED display indicates continuity for the shield and center conductor, as well as check for shorting across conductor paths. An additional continuity tester is included for testing CAT5/5E/6 straight through or crossover RJ-45, UTP, 10Base-T, 100Base-T, 1000Base-T EIA/TIA 568A/568/B network cables. The LED display on the tester identifies the cable pairs and indicates a correctly wired cable. It will also identify crossed pairs or miss-wired pairs. The kit is housed in a foam-lined impact resistant plastic case.

For additional information call us at 858-549-6340 or 800-233-1728. You can also e-mail rfi@rfindustries.comDownload PDF

75-ohm SMB's ideal for miniature circuitry

75-Ohm SMA Connectors

RF Connectors' 75-Ohm SMB Connectors are available in a wide range of configurations including plugs, right-angle plugs, and PCB jacks and are suitable for use in applications with a frequency range up to 4 GHz. The 75-Ohm SMB Connector series provides consistent low mating and un-mating force in positive lock mating as well as snap-on mating faces. Constructed in accordance with the requirements of MIL-PRF-39012, their interface is in compliance with MIL-STD-348. This series has broadband performance with low reflection and is ideally suited for circuit miniaturization and mate with any standard 75-Ohm snap-on jack or plug.

For additional information call us at 858-549-6340 or 800-233-1728. You can also e-mail us at rfi@rfindustries.com Download PDF

Variety of Bulkhead Mount SMA Connectors in Stock for OEM Applications

Bulkhead Mount SMA Connectors

RF Connectors, division of RF Industries, offers a variety of SMA bulkhead mount connectors for use in OEM applications. Mounting configurations include front and rear mount with solder cup electrical terminations. Male and female SMA connector interfaces are available. Connector bodies are machined brass with nickel of Gold plating. All dielectrics are PTFE with Gold plated contacts.

Part numbers are

For additional information call us at 858-549-6340 or 800-233-1728. You can also e-mail us at rfi@rfindustries.com Download PDF

7/16 DIN Crimp and Solder /Clamp attachment Connectors for LMR®-600 are Convertible for Right Angle Applications

7/Din Connectors

7/16 DIN connectors are large format 50 ohm interfaces designed for high power wireless telecom applications. RF Connectors, division of RF Industries, introduces two versions of 7/16 DIN connectors for Times LMR®-600 cable. The RFD-1600-2L2 attaches to the cable with a solder/clamp method. The RFD-1605-2-L2 attaches with a crimp/solder method. Both connectors have a combination feature that allows them to be assembled for straight or right angle applications in the field. Both connectors conform to the DIN specification of silver plated bodies and pins with PTFE dielectric. The coupling nuts are designed with a hex/ knurl combination that allows for hand or wrench tightening.

Originally developed and deployed in Europe, the 7/16 interface has gained acceptance in North America. DIN is an acronym for Deutsche Industries Norm, a German standard. 7/16 is derived from the diameter of the center contact (7mm) and the diameter of the outer contact (16mm). Characteristics of the design include silver plated connector bodies and contacts for reduced signal distortion from intermodulation. Operating frequency range is up to 7.5Ghz.

LMR®-600 is a trademark of Times Microwave

For additional information call us at 858-549-6340 or 800-233-1728. You can also e-mail rfi@rfindustries.com Download PDF

Universal cable tester is field-ready for virtually all assemblies

RFA-4018-20 cable tester

RF Connectors division of RF Industries announces a cable tester to detect open and short faults in coaxial cable assemblies. This tester is constructed with the Unidapt™ universal connector system that allows testing virtually any connector with the attachment of the adapters from the Unidapt™ adapter kits from RF Connectors. The LED front panel indicates Pass or Fail with a simple red light, green light. The tester saves time by indicating whether the failure is due to a short, open conductor or open shield. The RFA-4018-20 is powered by a 9-volt battery. It is lightweight, small, and completely portable for remote site use.

RF Connectors is a division of RF Industries (NASDAQ RFIL) a leading supplier of connecting solutions provided through its operating divisions: RF Connectors, RF Cable Assembly.

For additional information call us at 858-549-6340 or 800-233-1728. You can also e-mail us at rfi@rfindustries.com Download PDF

Fiber Optic Cables

Fiber Optic cable and assemblies using that cable are growing increasingly popular as the medium of choice for digital VCR, DVD CATV, audio, game, hub, computer and telecommunications applications.

  • All assemblies are 100% tested and manufactured in a controlled factory environment to maximize performance and reliability.
  • Assemblies are terminated with connectors that are designed to be compatible with industry standards: EIA/TIA 504.4 (FOCIS-4), IEC 1754-13-1, ANSI, JIS C-5970, NTT.
  • The SC and ST connectors are compliant with Bellcore 326 specifications.
  • Assemblies are available in simplex and duplex styles in single-mode and multi-mode with SC and ST terminations.
  • Custom lengths are available on special order.

Low Loss and High Performance Cable Connectors

In response to customer demand, RF Connectors offers many coaxial connectors designed to function optimally with high performance, loss cables from Amphenol, Belden®, CommScope, Harbour Industries and Times Microwave. These cables perform with low losses comparable to equivalent sizes of corrugated cable but at much lower costs.

Semi-Rigid Cable Assemblies

Straight semi-rigid cable assemblies are available as stock items in lengths from 4 inches to 24 inches. Both formable and standard semi-rigid cables are used. Bent assemblies are available as custom items.

Cutomer-Terminated Pigtail Assemblies

There are times and applications where an assembly needs to be run through conduit, panel enclosures or threaded through tight spaces. Having one end open allows installation of the cable itself followed by termination after placement.

When you know one end of the assembly, but are not sure of your length or which connector you need at the other end, our extensive line of pigtail assemblies should meet your requirements. One end is terminated as shown, but the other end is blunt-cut, ready to be stripped and terminated with a connector of your choice.

To determine your cable assembly part number, simply replace the XX at the end of the number shown with the length in inches you require. The cost of your assembly will then be quoted based upon that length. Overall tolerance is +2"-0, from end to end

FCC Part Compliant Connectors and Cable Assemblies

According to FCC Regulations Part 15.203, under certain applications it is illegal to replace a stock antenna with one that provides higher gain. The FCC has issued an edict calling for a unique connector, thereby prohibiting the attachment of any other connector type. Some examples of compliance to this regulation are:

  • Reverse Threads
  • Reverse Polarity/Reverse Gender
  • Non-Standard Threads
  • Non-Standard Shells

We offer not only these unique connectors but also a variety of cable assemblies incorporating these connectors. The cable assemblies are available in standard as well as special order lengths.

Reverse Polarity/Reverse Gender connectors satisfy FCC Regulation 15 by switching dielectrics and pins/contacts between genders. For example, a Reverse Gender Male consists of a male body, however, the dielectric and contact are female. Reverse Polarity connectors and adapters will not mate with standard coaxial connectors. To attempt to do so will damage the connector.

Reverse Thread configurations use left-hand threads rather than the Standard Unified Screw Thread.

The Non-Standard Threads/Shells category incorporates two methods of modifications: extended metric threads and modified shells. The metric threads on the TNCs are incorporated on both females and males preventing interface with regular connectors. Because female metric threads are elongated, interface with a quick-disconnect male connector is prevented.

If you have any additional requirements falling under Regulation 115 which meet our minimum quantity requirements, our design engineering and production team can provide custom connectors made to your specifications.

Create custom adapters and cable assemblies in seconds! Our Universal Adapter is the Key.

Each Unidapt™ fitting has a common connector end and a universal adapter end. Simply choose the two common connector ends you need, and screw them together with the universal adapter.

It's so easy. That's why technicians love it. Our ingenious adapter kits let you mix and match any 2 male or female coaxial fittings. Build the perfect adapter or cable assembly for the job—male to male, male to female, or female to female.

All Unidapt™ sections are made of silver plated machined brass with a gold plated phosphor bronze contact anchored in a PTFE dielectric.

Find out more about our Unidapt™ system