|
MC Card connectors
are designed
for wireless and telecom devices operating at frequencies up to 8
GHz where board and chassis space is limited. The
RMC-6000-B,
straight plug, and
RMC-6010-B,
right-angle crimp connectors, are designed for use with RG-174/U,
RG-188/U and RG-316/U cables and mate with PCB, card-mounted jacks.
Bodies are of nickel-plated, machined brass. Contacts are
gold-plated Beryllium copper, with TeflonAf
insulation. More than 200 cable assemblies using MC Card connectors
are listed in our RF Cable Assemblies Catalog in standard and custom
lengths. Available on special order are MC Card jack internal PCB
antenna a^?oeTa^?? switches that are made of gold plated bodies and
contacts with TeflonAf
insulation.
|
|
The new RFH series connectors
are small and low profile MHF coaxial connectors with a mounting
area of 3mm x 3mm on PCB and 2mm height when mated. Designed for
applications operating from DC to 6 GHz, they are used for high
density data and telecommunication hardware, such as PDAs, handsets,
personal communication systems (PCS), global positioning systems
(GPS), wireless LAN (WLAN), wireless local loops (WLL), and paging.
These cable assemblies exhibit a VSWR of 1.3 max. up to 6 GHz. The
MHF connectors have a nominal impedance of 50 Ohms, with a
dielectric withstanding voltage of 150V AC RMS and temperature range
of -40 C to +90 C degrees. The right angle plug and
RFH-4911,
PCB mount MHF socket, are gold plated. The right angle plug is
available on a 32 AWG coax cable assembly under the following
numbers:
RFW-10506-XX,
MHF plug to MHF plug,
RFW-10507-XX,
MHF plug to pigtail, or cut end. The
RFH-4911
is available in tape and reel.
|
